0755-28286748

MEMS传感器

首页MEMS传感器BOSCH 博世BMI263
BMI263

BMI263

The he ultra-low power BMI263 is Bosch Sensortec’s first IMU which is compliant with the latest I3C standard as defined by MIPI AllianceBMP581 is the new benchmark in the field of barometric pressure sensors and impresses with its enormous accuracy

产品特性

The ultra-low power BMI263 is Bosch Sensortec’s first IMU which is compliant with the latest I3C standard as defined by MIPI Alliance. This 6-axis sensor combines precise acceleration and angular rate measurement data with intelligent on-chip motion-triggered interrupt features. Based on the MIPI I3CSM serial interface with two signal lines (Data SDA & Clock SDC), the BMI263 shows reduced pin count, wiring complexity, signal paths and offers consequently high-speed data transfer at very low power levels compared to the traditional I2C or SPI interfaces.

Technical data

ParameterTechnical data
Digital resolution
Accelerometer (A): 16-bit or 0.06 mg/LSB
Gyroscope (G): 16-bit or 0.004 dps/LSB
Programmable measurement range & sensitivity
(A): ±2 g: 16384 LSB/g
to
(A): ±16 g: 2048 LSB/g

(G): ±125 dps: 262.1 LSB/dps
to
(G): ±2000 dps: 16.4 LSB/dps
Zero-g/zero-rate offset
(A): ±20 mg
(G): ±0.5 dps
Sensitivity error
(A): ± 0.4%
(G): ± 0.4% (with CRT)
Temperature range
-40 … +85 °C
Temperature behaviour
(TCO; TCS)
(A): ±0.25 mg/K; ±0.004 %/K
(G): ±0.02 dps/K; ±0.02 %/K
Noise density
(A): 160 µg/√Hz
(G): 0.008 dps/√Hz
Offset vs PCB strain
(A): ±0.01 mg/µε
(G): ±1.5 mdps/µε
Filter BW (programmable)
(A): 5 Hz … 684 Hz
(G): 11 Hz … 751 Hz
Output data rate (ODR)
(A): 12.5 Hz … 1.6 kHz
(G): 25 Hz … 6.4 kHz
Digital inputs/outputs
1x MIPI I3CSM
2x SPI; 2x I2C; AUX I/F; OIS I/F
2x digital interrupts
Supply voltage
1.7 … 3.6 VDD
1.2 … 3.6 VDDIO
Current consumption
~700 µA at full ODR (aliasing-free)
Package size
2.5 x 3.0 x 0.8 mm³
14 pin LGA
产品应用
      AR  VR
规格
型号DataSheetDimension (mm)Description
微信关注
© 2013-2024  深圳市德立盛科技有限公司 粤ICP备20037326号